HD Mould - Dragonfly & Rushes

HD Mould - Dragonfly & Rushes

Availability: In stock

Regular Price: $14.50

Special Price $11.50



Perennially popular dragonflies, this mould makes a stunny soap.  This Heavy Duty mould makes four large bars weighing up to approximately 175g per bar - to make smaller soaps simply 1/2 or 3/4 fill.

Suitable for Cold Processed, Hot Processed and Melt & Pour Soaps.

Cavities:  4
Soap weight: 175g
Dimensions:  9.5cm x 6cm x 3cm Deep
Material:  FDA approved polystyrene plastic, 5 percent rubber

Usage Instructions: These moulds work best for melt and pour soap. Let the bars fully cool and harden before unmolding, which can take up to 12 hours. Then, pull on the sides of each cavity, flip the mold over, and press gently on the back of the cavities to release the soap. If it's not releasing easily, place the mold in the freezer for no longer than 15 minutes, remove to room temperature for 2-5 minutes, and try again.

When using for Cold Process Soap ensure you use a hard recipe, and use the freezer method as above to unmould.  Do NOT twist the mould or it will crack.

More Info on how to Use and Care for Heavy Duty Moulds info here

Additional Information

Additional Information

Name HD Mould - Dragonfly & Rushes
Cavities 4
Individual Bar Weight Up to 175g
Manufacturer Bramble Berry
Mould Material FDA approved polystyrene plastic, 5% rubber
Mould Colour White
Individual Bar Dimensions 9.5cm x 6cm x 3cm Deep