Loading...

Flexible Embed Mould - 4-in-1-cylinder

Flexible Embed Mould - 4-in-1-cylinder
APN: SILem4

Availability: In stock

$19.50
OR
Description

Details

This innovative 2-piece silicone mould makes four small columns of soap that are amazingly easy to unmould.  This mould is also perfect for half size candles, with siicone is sturdy enough for a hot pour.

The mould design makes use of extra thick silicone to keep the sides from bowing out and distorting the round shapes. The interlocking seal is simple to use, no clamps or bands are needed.  And of course, since it is made of silicone, this mould is extremely easy to release your soap and wash.  As with most silicone moulds, your Cold Process Soap may need an extra day or two in this mould to fully harden since the flexible silicone sides do not allow air inside the mould, which results in slower evaporation of water and hardening of your soap.

It is a dream to use for Melt and Pour Soap too!  Quick and easy soap crayons can be made with this cylinder mould - it has the perfect diameter for soapy crayons!

Tip: If making Cold Process soap in this (or any) silicone mould we recommend adding Sodium Lactate Plus to your recipe.  This will help to harden up your soap so that there won't be any dents or finger marks from unmoulding the soap.

Please Note: To avoid any leaking make sure the interlocking seal is fully pressed together around the entire edge and between the cavities.  Also be sure the mould is firmly propped up so it doesn't tip over during use.  We like to use a loaf mould, or a couple of blocks of Melt and Pour Soap to ensure it’s totally stable!

Cavities:  4
Individual soap weight:  40g
To fill all 4 cylinders with one pour: 170g
Dimensions:  approximately 2cm Diameter and 9.2cm (long/high)

Click here to watch SQ Silicone Two Piece Mould Usage Video

HAND WASH ONLY, DO NOT WASH IN A DISHWASHER!

Additional Information

Additional Information

Name Flexible Embed Mould - 4-in-1-cylinder
Short Description

This innovative 2-piece silicone mould makes four small columns of soap that are amazingly easy to unmould.  The mould design makes use of extra thick silicone to keep the sides from bowing out and distorting the round shapes.

SKU SILem4
Cavities 4
Individual Bar Weight 40g
Temperature -10 - 230°C
Manufacturer Bramble Berry
Mould Material Silicone
Mould Colour Natural/Clear
Individual Bar Dimensions 2cm Diameter and 9.2cm (long/high)
Overall Capacity 170g
Suitable for Cold Processed and Melt & Pour Soap, Massage Melts