Coco-Macadamia Cold Processed Soap Loaf
  • Difficulty Intermediate
  • Time 1 hour
  • Yields 10 - 14 bars


CP Lemon Coco Macadamia Natural Soap Recipe

This is an ITP swirl using Bramble Berry Sweet Meyer Lemon Fragrance and Saturn Yellow Mica.

What is ITP? This is a Soaper's abbreviation for "In the Pot". This means you don't actually swirl the colour through the soap, the colour is simply poured into the main pot and the colours mix themselves as you pour the batch from the main soap pot into the mould. A slab or log Mould are best for this kind of soap, though vertical moulds can look really nice too.

The most important thing with ITP style colouring is to avoid overtracing the soap.  If it is too thick, it won't swirl well and will clump instead of flowing.  Also important is to use a fragrance or essential oil that doesn't accelerate trace. (Just check the notes on each of our fragrances so you know what to expect).



For how to make soap from Scratch, please see our Cold Process Soapmaking Instructions Page

If you are a beginner, we recommend you make a few batches before attempting this soap as it can be a little overwhelming trying so many new things when just starting out. If you are more experienced, you can follow the instructions below.  Follow all the usual safety procedures.  If you are not familiar with these please begin with the basic tutorial above.

  • Prepare all ingredients and line the mould as usual
  • Prepare the mica in a little oil

  • Set aside a spare 1 Litre jug for the yellow mica swirl colour

  • Prepare your workspace and set out everything ready to go

  • Bring soap to thin trace, and then pour approximately 1 - 2 cups of soap into the spare jug

  • Colour this with the mica paste you are using and briefly give it a blast with the stick blender - careful not to overtrace - add more colour until you reach a shade and depth you are happy with

  • Add the fragrance into the main pot and stir through by hand.  Mix thoroughly, but don't increase the thickness of the trace

  • Now work quite quickly - pour the yellow portion into the main pot


  • Still working quickly, pour the soap into the log mould, moving along its length as you pour – the colours will mix as you do this

  • By slightly moving the soap pot as you pour you can alter the pattern a little if desired

  • If you want a textured top, you'll need to work with a thicker trace, or if don't wish to cover the top to avoid ashing, spritz liberally with Isopropyl Alcohol, then insulate for gel, or you can cover with acetate once firm enough to lie this over the top without it sticking

  • Unmould and slice as usual

Note: If you would like a textured top, you need to balance the thickness of trace with its ability to sit nicely on top in that textured look.