This Mould makes one large slab of soap that can be easily cut into 18 bars of Soap because it is scored ready for easy cutting. . This slab is well suited for embedding pre-made soap shapes or shredded soap, or to make simple, clean rectangles this tray 2.2kg of Melt & Pour Soap or Cold Processed Soap.
The Mould is designed with “score” lines, so you can easily cut the soap into neat, even bars.
1 Cavity per Sheet – when cut makes 18 bars of Soap
Tray Size Measures: 34cm x 25cm x 3.8cm deep
Each bar once cut measures approximately 5.7cm x 8.2cm x 3.8cm deep
Total weight of soap for pour is 2.2kg
Each slab makes 18 Bars of Soap
Weight: 120g
Note: If using for CP Soap we recommend that you watch the gel and don’t allow too hot a gel stage to avoid possible warping.
The graphic to the right shows the corner of this mould. The rounded corners create a stronger mould that last longer as "webbing" issues do not occur with this corner design.
If the corners were perfectly square on this large slab tray the mould would be not be as strong and may crack during unmoulding. The corners extend past the side to allow the soap to be trimmed into uniformly shaped bars.
See full usage and how to care for this Mould HERE
